ClickCease
 

Marble Travertine Cleaning, Polishing, Sealing In Los Angeles: Experts Take On Problems & Solutions

Your natural stone and tile provide you with the value, design, functionality, and status of your environment including countertops, walls, floors, baths, and vanities-both indoors and out. Natural stone-especially Calcite-based stones such as Marble, Travertine, Limestones, and many other states have a delicate chemical composition that makes them more beautiful and elegant. With time and use; natural stone like Marble & Travertine will become dirty, dull-looking, scratched, etched, cracked, chipped, or damaged. The good news is professional stone restoration companies provide expert natural stone care services such as Travertine restoration services for residential and commercial properties. They provide a full range of natural stone care and maintenance services.


Key Takeaways:


Companies dedicated to Travertine tile maintenance in Los Angeles can provide you with different natural stone care services from minor services like floor polishing to major services like complete floor repair and restoration. In this blog, we are going to discuss the most common problems that may occur in the natural stones and professional tricks to remove them. Kindly go through this blog to know how professionals make your stones look brand new.


Common Problems:


Coatings: Coating Substances such as Wax, Acrylic, Urethane, etc sometimes block the pores of natural stone and do not allow the stone to breath or any vapor to go out. This can cause spalling. If the pores are blocked by non-penetrating sealers, the internal vapor seeks its exit through a weak spot in the stone and causes cracks. In addition, coating masks can also cause other problems such as heavy etching, cracks, and deep scratches.


Stun Marks: They appear as white marks on the surface and are very common problems in certain types of Marbles. These marks are the result of small explosions inside the crystal of the stone. Pinpoint pressures placed on the stone can also cause these marks. This type of damage is sometimes very deep in the stone. These marks can be difficult to remove. Professionals use grinding with coarse abrasives these marks, but sometimes replacement of the damaged stone is the only alternative.


Deep Scratches: These scratch marks are very common on the surfaces and professional stone restoration companies can repair them by performing wet sanding or diamond sanding and refinishing them with medium to coarse grit diamond abrasives.





Efflorescence: It appears as a white powdery residue on the surface of the stone and it is a very common condition on new stone installation. The powder is a mineral salt from the setting bed and one must not use water to remove them. Professional services for Marble Travertine cleaning, polishing, and sealing In Los Angeles are familiar with those types of stone care problems and have the expertise to fix it.


Etching: Acidic products such as Citrus juice, wine, vinegar, soft drinks, tile cleaners, etc may spill on the floor and create a dull area on the stone which is called Etching. Natural stones like Marble, Travertine, and limestone can be easily etched. Professionals use Diamond sanding to remove etches and restore the natural stone floor area to its original-like shine and seal it properly.


Lippage: Tiles that are set unevenly are termed as Lippage. In this case, the edge of one tile is higher than the next due to poor installation. Excessive lippage will have to be grounded by expert professionals to alleviate the problem. professionals use coarse grit diamonds or abrasive stones to grind or resurface. This kind of problem can only be managed by professional stone restoration companies.

Loss Of Shine: Over the period, natural stones lose their shine and it is especially true for Marbles. It is much softer than other natural stones and dirt & sand will wear the polish off of a stone floor surface. Expert stone restoration professionals use special powders and polishing compounds to restore the shine on the floor.


Spalling, Chips, and Holes: Small pieces of stone popping off the floor surface are called spalling. If the stone is exposed to large amounts of water Spalling may happen. Mineral salts are the major reasons behind spalling and pitting. Professionals use Polyester, epoxy, or cement-based filler materials with color to fill the spalling, chips, and holes. The area must be resurfaced after filling to smooth out and level the filler material with the stone surface.


Staining: Some stone surfaces become stained easily from food substances or drinks, ink, oil, and rust. Stone restoration experts use professional techniques to remove difficult stains.


Water Rings: Water rings are very common on marble and other natural stone surfaces. Water rings and spots are caused by hard water minerals such as Calcium and Magnesium that are left behind when water evaporates., leaving a spot. Marble restoration professionals use marble polishing compounds to remove these spots. Severe etching will require professional honing by stone restoration professionals.


Yellowing: The light-colored stone becomes yellow and can be caused by several reasons. White marble contains iron that oxidizes over time causing a yellow appearance. However, most yellowing is caused by dirt that is grounded into the stone. Professional stone restoration experts use deep-cleaning techniques by applying suitable Alkaline cleaner to remove the yellow appearance. Sometimes, they also use ammonium bi-fluoride solution to correct the Yellowing.


Find The Best Stone Restoration Company Nearby:


If you need to restore your Marble Travertine stone in the city of California, Titans Natural Stone Restoration can provide you with a wide range of services, including marble travertine floor cleaning, polishing, sealing, scratch, and stain removal, lippage removal, flattening of uneven natural floor surfaces, crack filling, and more, at an affordable price.

17 views0 comments